All About Carpet And Upholstery Cleaning Daily

Cleaning Tile Grout

Apr 7

If your tile grout lines are looking dirty and grimy, it’s time to give them a good cleaning! But before you start scrubbing away, there are a few things you should know about the best way to clean grout lines. With a little bit of knowledge and the right cleaning products, you can get your grout lines looking like new again in no time!

Article originally appeared on https://goodbeginnings.net.au/how-to-clean-tile-grout/

One of the most important things to remember when cleaning grout lines is to never use abrasive cleaners or scrubbers. These can damage the grout and make it more difficult to clean in the future. Instead, opt for a mild cleaner or soap and water. You may also want to try a baking soda and water solution, which can be effective for removing tough stains.

To clean your grout lines, start by applying your chosen cleaner to the area. You can use a sponge, brush, or cloth to scrub the grout lines gently. Be sure to rinse the area well afterwards to remove any residue. For stubborn stains, you may need to repeat the process a few times.

Once your grout lines are clean, you can help keep them looking that way by sealing them. This will create a barrier that will make it more difficult for dirt and grime to stick to the grout. Sealing is especially important in high-traffic areas like kitchens and bathrooms. You can find grout sealer at most home improvement stores.

With a little bit of effort, you can get your tile grout lines looking clean and new again! Just remember to use mild cleaners, avoid abrasive scrubbers, and seal the grout after cleaning to keep it looking its best.

Things you need to clean tile grout lines:

-Mild cleaner or soap

-Water

-Sponge, brush, or cloth

-Grout sealer (optional)

-Baking soda is a mild abrasive that helps to remove the grime trapped in porous grout surfaces without causing any damage.

-Although bleach can be harmful to certain surfaces, hydrogen peroxide is a safe and effective alternative that cleans and disinfects. It’s also odorless and non-toxic, decomposing into water and oxygen after it expires.

-Dishwashing detergent (used in Grout Cleaner #3) dissolves the filthy grime that accumulates on tiled floors.

How to maintain clean tile grout lines:

-Use a mild cleaner or soap and water solution to clean grout lines.

-Avoid using abrasive cleaners or scrubbers, which can damage the grout.

-Rinse the area well after cleaning to remove any residue.

-For stubborn stains, you may need to repeat the process a few times.

-Seal the grout after cleaning to create a barrier against dirt and grime.

Why it’s important to keep tile grout lines keep?

– tile floors can last for many years

– tile floors are easy to keep clean with the right tools and techniques

– tile floors can add value to your home

How to clean tile grout?

Allow the grout cleaner to work for a bit before scrubbing it clean. Allow your favorite cleanser some time to operate (also known as dwell time) before beginning cleaning before you see the best results. Allow the solution to rest on the surface for 5-10 minutes then scrape away the filth after cleaning tile grout.

Scrub the grout with a tiny, firm brush. Grout is porous, which means it has minute pores or holes through which liquid can flow. These tiny gaps are ideal hiding places for dirt and grime. Cleaning your grout with a small firm brush will loosen the gunk, making it easier to mop or wipe away.

Scrub after, not before. Sweep up any extra baking soda with a broom or wet/dry vac after scrubbing the grout clean, then give the whole tile floor one last sweep (or damp cloth) with warm water and a few drops of dish detergent or a mild floor cleaner. This final wash will remove any remaining grout cleanser residue and leave your tile grout looking sparkling clean.

Use a toothbrush for extra stubborn stains. If you’re still seeing stains after scrubbing with a bristled brush, try using an old toothbrush (or new one if you prefer). The smaller head on a toothbrush will help get into those tight spaces between tiles to break up any grout cleaner resistant dirt.

Re-grout tile if necessary. If your grout is looking extra stained or damaged, you may need to replace it entirely. This process involves removing the old grout and adding new grout in its place. Re-grouting is a more involved process that should be done by a professional if possible.

Seal the grout. Once your tile grout is clean, it’s important to seal it to create a barrier against future dirt and stains. Sealing the grout will also make it easier to clean in the future. You can find grout sealer at most home improvement stores. Apply the sealer according to the manufacturer’s instructions and wait for it to dry completely before using the area.

Regular cleaning and sealing will help keep your tile grout looking clean and new for years to come! Just remember to use mild cleaners, avoid abrasive scrubbers, and seal the grout after cleaning to keep it looking its best.